Mahr Digimar 817 CLM Operating Instructions Manual - page 80

80

Mahr GmbH • Digimar 817 CLM

5.2

Save measured values

–

By a longer activation of the DATA key, the following menu will

appear in the display:

1 Deselect a characteristic

2 Select a characteristic

3 Paper feed

4 Transfer to an USB printer

5 Save to the internal USB memory

6 Transfer to a PC (RS232 OUT)

–

By pressing the Save key, the measured values / characteristics

will be transferred to the internal USB memory.

Description / Sequence

Symbols / Pictures

DATA

A

1

2

3

4

5

6

ALLPARTS.TXT

Only the actual measured values will be transferred!

ACTUPART.TXT

5.2.1

Save measured values to a PC

–

Connect a USB cable to the USB interface (port) on the height

measuring instrument (type B) and to the USB interface on a PC.

Note:

The data will be stored as follows