Mahr Digimar 817 CLM Operating Instructions Manual - page 77
Manual is about: quick height
of
152
77
Mahr GmbH • Digimar 817 CLM
36
28
16
10
26
39
60
F6
F5
F4
F3
F2
F1
Nut
4.8.6 Relative zero point
–
Contact the plane F4 from above
Description / Sequence
Symbols / Pictures
0,00
See Workpiece-zero point 01
–
Press the function key „Set zero point“, the last measured
characteristic will appear in the display as Workpiece-zero
point 01.
In this example: Dimension = 60.001
⇒ Value 0.000 will be displayed
–
Contact the plane F4 from above. Plane F4 is set to „Zero“.
⇒ Result 60.001 will be displayed
All further characteristics refer to plane F4 until a further
workpiece zero point is set, or zero point 01 is deleted.