Mahr Digimar 817 CLM Operating Instructions Manual - page 18

18

Mahr GmbH • Digimar 817 CLM

1.3.2.5 Variable function keys

Depending upon the measuring task, the bitmap symbols above the variable function keys change accordingly. By

pressing the individual key, the function will be activated or you will enter a subdirectory / lower level. The different

meanings are described in the operating instructions.

1.3.2.6 Input pad

Each key is assigned a multiple character function, by

repeatedly pressing a key the next assigned character

will appear, for example:

2 -> A -> B -> C -> 2 -> A . . .

1.3.2.7 Quick-Mode

Activate / deactivate

1.3.2.8 Arrow keys

Arrow keys left / right - Cursor jumps 5 times left / right

Arrow keys up / down - Cursor jumps once up / down

– See chapter 4.8