D-Link DES-3624 - Switch - Stackable User manual - page 111
Stackable NWay Ethernet Switch User’s Guide
Basically, in these submenus you define whether the Switch
can intelligently forward IGMP packets, and you must also
define which 802.1Q VLANs (if present) can send and receive
IGMP and Multicast packets.
To access the IGMP Configuration screen, select Configure
Filtering and Forwarding Table from the System
Configuration menu. Then select Configure IGMP from the
bottom of the Configure Filtering and Forwarding table
screen. The following screen appears:
Figure 6-23. IGMP Configuration screen
Items in the above window are defined as follows:
♦ IP Multicast Filtering Age-out Timer (30-9999) When
this timer expires and the switch has not observed
(snooped) any IGMP query packets asking whether any
stations belong to any Multicast groups, the switch itself
Using the Console Interface
91