D-Link DES-3624 - Switch - Stackable User manual - Setup
Stackable NWay Ethernet Switch User’s Guide
Setup
The setup of the Switch can be performed using the following
steps:
♦ The surface must support at least 5 kg.
♦ The power outlet should be within 1.82 meters (6 feet) of
the device.
♦ Visually inspect the power cord and see that it is secured
fully to the AC power connector.
♦ Make sure that there is proper heat dissipation from and
adequate ventilation around the Switch. Do not place
heavy objects on the Switch.
Desktop or Shelf Installation
When installing the Switch on a desktop or shelf, the rubber
feet included with the device must be first attached. Attach
these cushioning feet on the bottom at each corner of the
device. Allow enough ventilation space between the device and
the objects around it.
Unpacking and Setup
9