D-Link DES-3624 - Switch - Stackable User manual - page 120
Stackable NWay Ethernet Switch User’s Guide
Figure 6-31. Add/Remove MAC-based Broadcast Domain
Members screen
The fields you can set are:
♦ Action Select the desired action by toggling between Add
and Remove.
♦ MAC Address The MAC address of the broadcast domain
member being added or removed.
Please note that the Status field for the MAC address you have
entered may read Not-Apply. Once the Switch is restarted in
MAC-based broadcast domain mode, the MAC-addresses will
be applied, meaning that the broadcast domain is active.
Current Broadcast Domain, Number of members, MAC
Address (in the lower part of the screen), and Status reflect the
current conditions. They are read-only fields and cannot be
changed.
100
Using the Console Interface