D-Link DES-3624 - Switch - Stackable User manual - page 134
Stackable NWay Ethernet Switch User’s Guide
Figure 6-41. SNMP Manager Configuration screen
The following SNMP Manager and Trap Manager Configuration
parameters can be set:
♦ SNMP Community String/Trap Community String
The community string that will be included on SNMP
packets sent to and from the Switch. Any station not
privy to this community will not receive the packet.
♦ Access Right Allows each community to be separately
set to either Read Only, meaning that the community
member can only view switch settings or Read/Write,
which allows the member to change settings in the
switch.
♦ Status/Trap Status Determines whether this
community name entry is Valid or Invalid. An entry can
be disabled by changing its status to Invalid.
114
Using the Console Interface