D-Link DES-3624 - Switch - Stackable User manual - Side Panels
Stackable NWay Ethernet Switch User’s Guide
Figure 3-2. Rear panel view of the Switches
♦ The optional Gigabit Ethernet slide-in module is an
uplink/MDI-II (media dependent interface) port for uplink
to another Switch (DES-3624i and DES-3624iF only).
Two models are available, one-port and two-port.
♦ The Stacking input/output port slide-in module in the
rear panel is for stacking to another device to implement
a high-port count, manageable Switch. The three-port
module is for a master device and a one-port module is
for a client device.
♦ The AC power connector is a three-pronged connector
that supports the power cord. Plug in the female
connector of the provided power cord into this connector,
and the male into a power outlet. Supported input
voltages range from 100 ~ 240 VAC at 50 ~ 60 Hz.
Side Panels
The right side panel of the Switch contains two system fans
(see the bottom part of the diagram below). The left side panel
contains heat vents.
Identifying External Components
15