D-Link DES-3624 - Switch - Stackable User manual - page 43
Manual is about: Stackable NWay Ethernet
Switch
of
228
Stackable NWay Ethernet Switch User’s Guide
Figure 3-11. The Switch LED indicators
♦ Power This indicator on the front panel should light
green after approximately 2 seconds to indicate the ready
state of the Switch when the device is powered on. The
LED will blink when the Power-On Self-Test (POST) is
running or if the system’s configuration has changed.
This LED will light orange when an error occurs.
♦ Console This indicator is lit green when the switch is
being managed via out-of-band/local console
management through the RS-232 console port using a
straight-through serial cable. When a secured connection
is established, this LED is lit. The indicator blinks when
the console RS-232 is accessed.
Identifying External Components
23