D-Link DES-3624 - Switch - Stackable User manual - page 218
Stackable NWay Ethernet Switch User’s Guide
Notes about the Configuration File:
This configuration file can only contain 4 settings:
Code_type,
Ip_addr,
Subnet_mask
and
Default_gateway
.
Each command can only appear once in the configuration file.
If both the Firmware Update and Use Config File options are
enabled, the Firmware Update command will take precedence
and only the firmware file will be uploaded to the switch.
The Config image file, which contains all configuration settings
and was created by the switch is prefixed with the version
number of the runtime software to help with file management.
# Sample Config File
Code_type=PROM
Image_file="e:\3624\3624prom.tfp"
# specify IP address
Ip_addr = 10.12.19.102
# specify subnet mask
Subnet_mask = 255.128.0.0
# specify default gateway
Default_gateway = 10.254.254.253
198 Sample
Configuration
File