D-Link DES-3624 - Switch - Stackable User manual - page 217
Stackable NWay Ethernet Switch User’s Guide
• PROM – PROM update file.
• RUNTIME – Switching software update file.
• CONFIG – Image file of switch settings created by the
settings backup procedure.
♦
Image_file
– This command tells the switch the complete
path and filename for the file to be loaded into the switch.
For example, “
e:\3624\3624prom.tfp
”. Make sure
double-quotes are used as in the example file below.
♦
Ip_addr
– This is the IP address that will be assigned to
the switch. This command is included for downloading a
configuration settings file to another switch. The IP address
defined in this file will override the IP address in the
configuration settings file, thus the switch you are
downloading to can have a different IP address than the
one that created the configuration settings file. An example
of an IP address is:
10.12.19.102
.
♦
Subnet_mask
– This is the subnet mask that will be
assigned to the switch. An example of a subnet mask is:
255.128.0.0
.
♦
Default_gateway
– This is the default gateway IP that
will be assigned to the switch. An example of a default
Gateway IP is:
10.254.254.253
.
♦ # – Remark. When placed as the first character on a line,
the entire line will be ignored by the switch. This allows
items to be labeled, or unused commands to remain in the
file so that the syntax will not be forgotten.
Sample Configuration File
197