D-Link DES-3624 - Switch - Stackable User manual - page 156
Stackable NWay Ethernet Switch User’s Guide
Location field, and the name of the contact person responsible
for the Switch in the System Contact field. Then click Apply.
Two hyperlinks at the bottom of this window provide access to
the Information Of Individual Switch Unit and Configure
Switch Stack – Advanced windows, respectively. These
windows are described in the two sections that immediately
follow.
The information in the window above is described as follows:
♦ Device Type A description of the Switch type.
♦ MAC Address The Ethernet address for the device.
♦ Boot PROM Version Version number for the PROM code.
♦ Firmware Version Version number of the firmware
installed on the Switch. This can be updated by using the
Firmware and Configuration Update window in the
Maintenance section.
♦ System Name A user-assigned name for the Switch.
♦ System Location A user-assigned description of the
physical location of the Switch.
♦ System Contact Name of the person to contact should
there be any problems or questions with the system. You
may also want to add a phone number or extension.
136 Web-Based
Network
Management