D-Link DES-3624 - Switch - Stackable User manual - Restart System
Manual is about: Stackable NWay Ethernet
Switch
of
228
Stackable NWay Ethernet Switch User’s Guide
Restart System
To perform a system reset, choose Restart System from the
main menu. Please note there is no confirmation query before
the system is rebooted.
Figure 6-51. Restart System screen
Factory Reset
Before performing a Factory Reset, be absolutely certain that
this is what you want to do. Once the reset is done, all of the
Switch’s settings stored in NV-RAM (including TCP/IP
parameters, SNMP parameters, the enabled/disabled settings
of ports, security settings, etc.) will be erased and restored to
values present when the Switch was purchased.
Note:After performing the Factory Reset, make sure to
redefine the IP settings for the Switch in the Configure
Using the Console Interface
129