D-Link DES-3624 - Switch - Stackable User manual - Save Changes
Stackable NWay Ethernet Switch User’s Guide
After establishing a User Account with Administrator-level
privileges, press Esc. twice. Then choose the Save Changes
menu (see below). Pressing any key will return to the main
menu. You are now ready to operate the Switch.
Save Changes
The Switch has two levels of memory normal RAM and non-
volatile or NV-RAM. Settings need to be changed in all screens
by clicking on the Apply button. When this is done, the settings
will be immediately applied to the switching software in RAM,
and will immediately take effect. Some settings, though,
require you to restart the Switch before they will take effect.
Restarting the Switch will erase all settings in RAM and reload
them from the NV-RAM. Thus, it is necessary to save all
settings to the NV-RAM before restarting the Switch.
In order to retain any modifications made in the current
session, it is necessary to choose Save Changes from the main
menu. The following screen will appear to indicate your new
settings have been processed:
Using the Console Interface
59