D-Link DES-3624 - Switch - Stackable User manual - Resetting The Switch
Stackable NWay Ethernet Switch User’s Guide
♦ Age-out Timer Displays the time the Switch waits
between IGMP queries.
♦ VLAN Enter the desired VLAN ID number.
♦ Multicast Group The Multicast IP address of the
Multicast group being displayed.
♦ MAC Address The Multicast MAC address of the
multicast group being displayed.
♦ Queries(TX) The number of IGMP requests sent by the
switch.
♦ Queries(RX) The number of IGMP requests that have
arrived at a switch port.
♦ Reports The number of notifications sent from each
station to the IGMP host, signifying that the station is
still (or wants to be) part of a multicast group.
♦ Ports The Switch ports supporting the selected
multicast group.
Resetting the Switch
You can use the console interface to reset the Switch, either
performing a Restart System or a Factory Reset (which sets
all of the Switch’s parameters to what they were when the
Switch was delivered from the factory).
128
Using the Console Interface