D-Link DES-3624 - Switch - Stackable User manual - page 125
Manual is about: Stackable NWay Ethernet
Switch
of
228
Stackable NWay Ethernet Switch User’s Guide
Figure 6-34. 802.1Q Static VLAN Settings screen
The fields you can set are:
♦ V-ID Enter a VLAN ID from 1 to 4094. This is the VLAN
that will be defined on this screen.
♦ VLAN Name Description of the VLAN.
♦ Tag/Untag Toggle between “T” for tag and “U” for untag for
each port.
♦ Egress Position the cursor over the dash “-“ representing
the appropriate port number and press
select “E” for Egress, or leave the dash “-“. An E designates
the specified port as a static member of the VLAN. A dash
means the port is not given VLAN membership for the VID
entered above.
♦ State Toggle between Active and Inactive.
Using the Console Interface
105