D-Link DES-3624 - Switch - Stackable User manual - page 123
Stackable NWay Ethernet Switch User’s Guide
Figure 6-33. Ingress Filtering Check screen
This screen allows you to set Ingress filtering for each port to
either Enabled or Disabled. When a packet arrives at the port
and Ingress filtering is Enabled, the port will check the VLAN
ID number of the packet, and its own VIDs. If there is a match,
the port will receive the packet. If the packet doesn’t have a
VLAN tag or the port is not a member of the VLAN for which
the packet is tagged, the packet will be discarded.
Note:If a port is a member of a trunk group but is not
the anchor, the items shown in the above table will
be read-only and the values will be the same as
those for the anchor port.
Choose Configure Port VLAN ID to access the second item on
the IEEE 802.1Q VLANs Configuration menu. The following
screen appears:
Using the Console Interface
103