D-Link DES-3624 - Switch - Stackable User manual - page 44
Stackable NWay Ethernet Switch User’s Guide
♦ Slot2 This indicator is lit green when a slide-in module
is present in the rear panel of the Switch.
♦ Slot3 This indicator is lit green when a slide-in module
is present in the rear panel of the Switch.
♦ Giga1 This indicator is lit green when a link is
established. It blinks green when the Gigabit port is
active.
♦ Giga2 This indicator is lit green when a link is
established. It blinks green when the Gigabit port is
active.
♦ Sio1 This indicator is lit green when a Stacking IO port
is present in the rear panel of the Switch.
♦ Sio2 This indicator is lit green when a Stacking IO port
is present in the rear panel of the Switch.
♦ Sio3 This indicator is lit green when a Stacking IO port
is present in the rear panel of the Switch.
♦ 100M These indicators are illuminated green when a
100 Mbps device is connected to any of the 22+2 or 20+2
ports or uplink port. If a 10 Mbps device is connected to
any of the 24 ports or uplink port, these LEDs remain
dark. When a port is active, these indicators will blink
green.
♦ Link/Act These indicators are lit when there is a secure
connection (or link) to a device at any of the ports. The
LEDs blink whenever there is reception or transmission
(i.e. Activity--Act) of data occurring at a port.
24
Identifying External Components