D-Link DES-3624 - Switch - Stackable User manual - page 141
Stackable NWay Ethernet Switch User’s Guide
Figure 6-46. Port Packet Error Statistics table
Select the desired device in the Switch field, the desired setting
in the Ports field, and the desired increment setting in the
Update Interval field: 5 sec, 15 sec, 30 sec, 1 min, or Suspend.
The statistic counters displayed are defined as follows:
♦ Speed If the link is up, the speed and duplex status will be
displayed; if the link is down “-” will be displayed.
♦ CRC Error The number of frames that fail the CRC
integrity check.
♦ Oversize The number of good frames with length greater
than 1536 bytes and therefore are greater than the
maximum legal length.
♦ Bad Fragment The number of packets less than 64
bytes with either bad framing or an invalid CRC. These
are normally the result of collisions.
Using the Console Interface
121