D-Link DES-3624 - Switch - Stackable User manual - page 166
Manual is about: Stackable NWay Ethernet
Switch
of
228
Stackable NWay Ethernet Switch User’s Guide
STP Custom Setting
Figure 7-9. Spanning Tree Custom Setting window
Enter the desired Spanning Tree custom settings on this
window and then click Apply.
The information above is described as follows:
♦ STP State The Spanning Tree Protocol state for a
selected port can either be Enabled or Disabled.
♦ Cost The Path Cost is a changeable parameter and
may be modified according to the Spanning Tree
Algorithm specification. Each 10 Mbps and 100Mbps
segment has an assigned Path Cost of 19.
♦ Priority Priority is a read-write object that can be set
from 0 to 255. This is the priority number of the port.
The lower the port priority, the more chance the bridge
146 Web-Based
Network
Management