D-Link DES-3624 - Switch - Stackable User manual - page 116
Stackable NWay Ethernet Switch User’s Guide
Figure 6-27. VLANs & MAC-based Broadcast Domains
Configuration screen
The information on the top of the screen is described as
follows:
♦ Current Mode Displays what mode, if any, is currently
enabled on the Switch.
♦ Restart Mode Choose from three settings for this mode:
MAC-Based Broadcast Domains, IEEE 802.1Q VLANs, or
NONE. After being restarted, the Switch will implement the
setting you have chosen.
♦ SNMP Vlan If the IEEE 802.1Q VLANs mode is selected, you
must also enter a SNMP VLAN ID number in this field. This
is a special VLAN that you designate for SNMP management
packets. Make sure the Switch port that the management
station is connected to has this PVID number and is a static
member of this VLAN.
96
Using the Console Interface