D-Link DES-3624 - Switch - Stackable User manual - page 127
Stackable NWay Ethernet Switch User’s Guide
can use the Update Firmware and Configuration Files screen
to control this feature.
Choose Update Firmware and Configuration Files to access
the fourth item on the Switch’s main menu. The following
screen appears:
Figure 6-36. Update Firmware and Configuration Files screen
After making your changes in the fields above, press REBOOT
TO START UPDATE to initiate the update sequence.
The fields you can set are:
♦ Software Update Mode Set to either network or SLIP.
Determines whether the configuration file should be
obtained through the Ethernet network or through the
console port.
♦ TFTP Server Address The IP address of the TFTP server
where the runtime (switching software) or configuration
Using the Console Interface
107