D-Link DES-3624 - Switch - Stackable User manual - Performance Features
Stackable NWay Ethernet Switch User’s Guide
♦ All ports can be auto-negotiated between
10Mbps/100Mbps, half-duplex or full duplex
connections.
♦ Gigabit uplink/MDI-II (media dependent interface) slide-
in module in the rear panel for uplink to another Switch.
One-port or two-port models are available (DES-3624i
and DES-3624iF only).
♦ RS-232 DCE console port for diagnosing the Switch via a
connection to a PC and Console/Out-of-band
management (DES-3624i or DES-3624iF only).
♦ One slide-in module interface in the front panel for 1 or 2
ports 10/100M Ethernet connection. Three optional
modules are available: 2-port TX, 2-port FX (MT-RJ), and
1-port FX (SC).
♦ Stacking Input/Output port slide-in module in the rear
panel for stacking to another device to implement a high-
port count, manageable switch. Three-port module for
master device and one-port module for a client device
.
Performance features
♦ Store and forward switching scheme capability to support
rate adaptation and protocol conversion.
♦ Full and half-duplex for 10Mbps and 100Mbps
connections. The 1000BASE-SX module operates at full-
duplex only. Full-duplex allows the switch port to
simultaneously transmit and receive data, and only
works with connections to full-duplex capable end
stations and switches. Connections to hubs must take
place at half-duplex.
Introduction
5