D-Link DES-3624 - Switch - Stackable User manual - Igmp
Stackable NWay Ethernet Switch User’s Guide
Figure 7-16. Static Permanent Multicast Filtering--Edit window
To edit or create a new filter, enter the MAC address in the
MAC Address field, select the desired Switch and Port in the
next two fields. Next, select Forward or Block for each port,
deciding whether that port transmits or blocks traffic for the
specified multicast group. Click Apply to activate the filter.
IGMP
Internet Group Management Protocol (IGMP) snooping allows
the Switch to recognize IGMP queries and reports sent between
network stations or devices and an IGMP router. IGMP is used
for managing IP multicast groups. The Switch will send IGMP
query messages and get the IGMP response from hosts to
“learn” the source port members of that multicast address.
When a multicast address is received and found on the IGMP
address table, it will be multicast to those port members.
Web-Based Network Management
153