D-Link DES-3624 - Switch - Stackable User manual - page 114
Manual is about: Stackable NWay Ethernet
Switch
of
228
Stackable NWay Ethernet Switch User’s Guide
Go back to the IEEE 802.1q IGMP Configuration menu and
choose Configure IGMP Control Table in order to
activate/deactivate the agents and configure settings for them.
Choose Configure IGMP Control Table from the IEEE 802.1q
IGMP Configuration menu to access the IEEE 802.1Q IGMP
Configuration screen:
Figure 6-26. IEEE 802.1Q IGMP Configuration screen
This allows you to enable/disable these agents and set aging
timers for them.
Items in the above window are defined as follows:
♦ VLAN ID This is the VID number for the VLAN that has an
agent attached to it which enables IGMP packets to be sent
and received.
94
Using the Console Interface