DAELIM Roadwin R Service Manual - 10. Cylinder Head / Valves
10-1
10. CYLINDER HEAD / VALVES
SERVICE INFORMATION
GENERAL SAFETY
The rocker arm and the camshaft can be serviced without removing the engine. However, the engine must be removed
from the frame to maintain the cylinder head.
The oil of camshaft is supplied through the cylinder head oil hole. Clean the oil hole prior to assembling the cylinder
head.
SPECIFICATIONS
SERVICE INFORMATION
10-1
TROUBLESHOOTING
10-2
CAMSHAFT
10-3
CYLINDER HEAD
10-5
VALVE SPRINGS
10-6
VALVES
10-7
VALVE GUIDES
10-7
VALVE SEATS
10-8
CYLINDER HEAD ASSEMBLY
10-11
CAMSHAFT ASSEMBLY
10-13
TORQUE VALUES
CAM CHAIN TENSIONER PIVOT BOLT
1.0 kgf
m (10N
m)
SPARK PLUG
1.1 kgf
m (11N
m)
CAMSHAFT HOLDER 8mm NUT
2.0 kgf
m (20N
m)
CAM CHAIN TENSIONER MOUNTING BOLT
1.2 kgf
m (12N
m)
CAM CHAIN TENSIONER SEALING SCREW
0.4 kgf
m ( 4N
m)
CYLINDER HEAD COVER BOLT
1.0 kgf
m (10N
m)
CRANK SHAFT HOLE CAP
0.8 kgf
m ( 8N
m)
A.C.GENERATOR CAP
0.6 kgf
m ( 6N
m)
ITEM
STANDARD VALUE
SERVICE LIMIT
Unit : mm
CAM HEIGHT
CAMSHAFT
VALVE,
VALVE GUIDE
IN
32.91~33.07
32.71
EX
31.80~31.96
31.60
VALVE SPRING FREE LENGTH
IN,EX
41.65
40.00
IN
4.975~4.990
4.925
EX
4.995~4.970
4.905
VALVE GUIDE INNER DIAMETER
IN,EX
5.000~5.012
5.030
CLEARANCE BETWEEN
IN
0.010~0.037
0.080
STEM AND GUIDE
EX
0.030~0.057
0.100
VALVE SEAT WIDTH
0.7~0.9
1.3
VALVE STEM OUTER DIAMETER