DAELIM Roadwin R Service Manual - Rear Wheel
15-3
REAR WHEEL/REAR SUSPENSION
REAR WHEEL
REMOVAL
Erect the motorcycle using a safety stand or hoist, raise
the rear wheel off the ground.
Loosen the chain adjust nuts and lock nuts.
Remove the axle nut (U-nut).
INSPECTION
Axle
Place the axle in V-blocks and measure the runout.
Actual runout is 1/2 the total indicator reading.
SERVICE LIMIT : 0.20mm
Wheel rim runout
Check the rim runout by placing the wheel in a turning
stand.
Spin the wheel slowly and read the runout using a dia
indicator.
Actual runout is 1/2 the total indicator reading.
SERVICE LIMIT : RADIAL : 2.0mm
SERVICE LIMIT :
AXIAL : 2.0mm
Push the rear wheel forward.
Remove the drive chain from the driven sprocket.
Remove the axle from the left side and remove the rear
wheel.
Remove the side collars.
DIAL GAUGE
DIAL GAUGE
DIAL GAUGE
DIAL GAUGE
DIAL GAUGE
DIAL GAUGE
DIAL GAUGE
DIAL GAUGE
DIAL GAUGE
DIAL GAUGE
DIAL GAUGE
DIAL GAUGE
DIAL GAUGE
DIAL GAUGE
DIAL GAUGE
DIAL GAUGE
DIAL GAUGE
AXLE NUT
AXLE NUT
AXLE NUT
AXLE NUT
AXLE NUT
AXLE NUT
AXLE NUT
AXLE NUT
AXLE NUT
AXLE NUT
AXLE NUT
AXLE NUT
AXLE NUT
AXLE NUT
AXLE NUT
AXLE NUT
AXLE SHAFT
AXLE SHAFT
AXLE SHAFT
AXLE SHAFT
AXLE SHAFT
AXLE SHAFT
AXLE SHAFT
AXLE SHAFT
AXLE SHAFT
AXLE SHAFT
AXLE SHAFT
AXLE SHAFT
AXLE SHAFT
AXLE SHAFT
AXLE SHAFT
AXLE SHAFT
AXLE SHAFT
AXLE SHAFT
AXLE SHAFT
AXLE SHAFT
AXLE SHAFT
AXLE SHAFT
AXLE SHAFT
AXLE SHAFT
AXLE SHAFT
AXLE SHAFT
AXLE SHAFT
AXLE SHAFT
AXLE SHAFT
AXLE SHAFT
AXLE SHAFT
AXLE SHAFT