DAELIM Roadwin R Service Manual - Crankcase Disassembly

12-3

CRANKCASE/TRANSMISSION/CRANKSHAFT

CRANKCASE DISASSEMBLY

The  engine  must  be  separated  from  the  frame.

(

section 6)

Refer  to  the  service  information  for  removal  of

necessary  parts  before  disassembling  the

crankcase.

Remove the gear change switch.

Remove the 6mm bolt from the right crankcase.

Place  the  crank  case  down,  and  separate  the  right

crankcase  from  the  left  crankcase  by  tapping  the

crankcase with a soft hammer.

Remove the cam chain.

Remove the crankcase breather tube.

Loosen the ten 6mm crankcase bolts in a crisscross

pattern in 2~3 steps, remove the bolts.

Remove the dowel pins and gasket.

DOWEL PINS

DOWEL PINS

DOWEL PINS

DOWEL PINS

DOWEL PINS

DOWEL PINS

DOWEL PINS

DOWEL PINS

DOWEL PINS

DOWEL PINS

DOWEL PINS

DOWEL PINS

DOWEL PINS

DOWEL PINS

DOWEL PINS

DOWEL PINS

Be careful not to distort the mating surface of the

crankcase during removal.