DAELIM Roadwin R Service Manual - Air Cleaner

2-5

INSPECTIONS / ADJUSTMENTS

AIR CLEANER

Remove the seat. (

13-2)

Loosen  the  4  screws,  remove  the  air  cleaner  housing

cover.

Remove  and  discard  the  air  cleaner  element  in

accordance with the maintenance schedule.  (

2-3)

Also  replace  the  air  cleaner  element  any  time  it  is

excessively dirty or damage.

Install in the reverse order of removal.

Do  not  reuse  the  air  cleaner  element  to  clean  by

compressed air.

SCREWS

SCREWS

SCREWS

SCREWS

SCREWS

SCREWS

SCREWS

SCREWS

SCREWS

SCREWS

SCREWS

SCREWS

SCREWS

SCREWS

SCREWS

SCREWS

SCREWS

SCREWS

AIR CLEANER

HOUSING COVER

AIR CLEANER

HOUSING COVER

AIR CLEANER

HOUSING COVER

AIR CLEANER

HOUSING COVER

AIR CLEANER

HOUSING COVER

AIR CLEANER

HOUSING COVER

AIR CLEANER

HOUSING COVER

AIR CLEANER

HOUSING COVER

AIR CLEANER

HOUSING COVER

AIR CLEANER

HOUSING COVER

AIR CLEANER

HOUSING COVER

AIR CLEANER

HOUSING COVER

AIR CLEANER

HOUSING COVER

AIR CLEANER

HOUSING COVER

AIR CLEANER

HOUSING COVER

AIR CLEANER

HOUSING COVER

AIR CLEANER

ELEMENT

AIR CLEANER

ELEMENT

AIR CLEANER

ELEMENT

AIR CLEANER

ELEMENT

AIR CLEANER

ELEMENT

AIR CLEANER

ELEMENT

AIR CLEANER

ELEMENT

AIR CLEANER

ELEMENT

AIR CLEANER

ELEMENT

AIR CLEANER

ELEMENT

AIR CLEANER

ELEMENT

AIR CLEANER

ELEMENT

AIR CLEANER

ELEMENT

AIR CLEANER

ELEMENT

AIR CLEANER

ELEMENT

AIR CLEANER

ELEMENT

AIR CLEANER

ELEMENT

AIR CLEANER

ELEMENT

SPARK PLUG

Remove the spark plug cap.

Check the plug for damage, contamination or deposits.

If the spark plug is severely contaminated or damaged,

raplace with a new one.  If the plug can be reused after

removing  only  the  carbon,  use  plug  cleaner  and  wire

brush to clean the plug.

Always use a feeler gauge to check the gap.

GENUINE PLUG : CR9EH-9

SPARK PLUG GAP : 0.8~0.9mm

TORQUE : 1.1kgf

m

Assemble the spark plug.

Make sure there is no dirt or debris on the seat of the

spark plug hole before inserting the spark plug.

To prevent damage to the cylinder head, handtighten

the spark plug before using a wrench to tighten to the

specified torque. 

Do not overtighten the spark plug.

0.8~0.9mm

CHECK GAP,

DEPOSITS

CHECK FOR

CRACKS

CHECK WASHER

FOR DAMAGE

SPARK PLUG

SPARK PLUG

SPARK PLUG

SPARK PLUG

SPARK PLUG

SPARK PLUG

SPARK PLUG

SPARK PLUG

SPARK PLUG

SPARK PLUG

SPARK PLUG

SPARK PLUG

SPARK PLUG

SPARK PLUG

SPARK PLUG

SPARK PLUG