DAELIM Roadwin R Service Manual - Cylinder Head
of
295
10-4
CYLINDER HEAD / VALVES
Check the cam lobes of the camshaft for wear or
damage.
Measure the height of the cam lobe.
SERVICE LIMIT : IN : 37.110 mm
EX: 36.870 mm
Manually turn the camshaft bearing outer race, and
check if it turns smoothly.
Check the bearing for wear or damage.
CYLINDER HEAD
REMOVAL
Remove the cylinder head cover
Remove the camshaft.
Remove the cylinder head special socket nut(M8)
Remove the cylinder head from the cylinder.
Remove the throttle body insulator.
Take precautions not to allow the cam chain to drop
into the crankcase.
Remove the cylinder head gasket, dowel pins and
cam chain guide from the cylinder.