DAELIM Roadwin R Service Manual - Main Switch
of
295
20-5
LIGHTS/METER/SWITCHES
REMOVAL/INSTALLATION
Remove the key cover.
Remove the main seat
Remove the fuel tank
Remove the main switcs coupler
Disconnect the main switch wire connector.
Release the connector boot from the wire clamp.
Remove the socket bolts and remove the main switch
Install in the reverse order of removal.
MAIN SWITCH
INSPECTION
Remove the key cover.
Remove the main seat
Remove the fuel tank
Remove the main switcs coupler
Check for continuity between the wire terminals of the
main switch connector in each switch position.
Continuity should exist between the color coded wires
as follows:
ON
KEY ON
OFF
KEY OFF
LOCK
KEY OFF/LOCK
COLOR
R/W
B
-
MAIN SWITCH
BAT1
BAT2
KEY