DAELIM Roadwin R Service Manual - 18.How to Use Scan
of
295
EMS(Engine Management System)
5-41
The coupler to check the malfunction of vehicle
is connected to the coupler of diagnostic tool.
Turn on the lgnition key.
Press the power button of the diagnostic tool.
Press the enter button in the initial screen.
Press the enter in the vehicle diagnosis screen.
Press the enter button on the resetting ECU values.
Press the rest button on the following screen.
If the enter-key is press than the ECU will reset.
18.HOW TO USE SCAN
WHEN THE ECU IS INITIALIZED