DAELIM Roadwin R Service Manual - page 202

14-22

FRONT WHEEL/FRONT FORK/STEERING

Install the steel ball.

Apply  grease  to  top  and  bottom  ball  races  and  cone

races.

Instert the steering stem into the steering head pipe.

Insall the steel ball and top cone race.

Install  and  tighten  the  steering  head  top  thread  to  the

initial torque. 

TORQUE : 2.5 kgf

m (25N

m)

TOOL : STEERING STEM SOCKET

Move the steering stem right and left, five times to seat

the steel balls.

Make  sure  that  the  steering  stem  moves  smoothly,

without play or binding ; then loosen the steering head

top thread.

Retighten the steering head top thread to the specified

torque.

TORQUE : 0.3 kgf

m (3N

m)

Recheck  that  the  steering  stem  moves  smoothly

without play or binding.

INSTALLATION

TOP CONE RACE

STEEL BALLS

STEEL BALL RACE

STEERING STEM

FR. BRAKE HOSE STAY

STEEL BALL RACE

STEEL BALLS

WASHER

DUST SEAL

STEERING HEAD TOP THREAD

BOTTOM CONE RACE