DAELIM Roadwin R Service Manual - Side Stand

2-13

INSPECTIONS / ADJUSTMENTS

Minor  adjustments  are  made  using  the  upper

adjuster at the clutch lever.

Loosen the lock nut and turn the adjuster.

Major adjustments are performed at the clutch arm.

Loosen  the  lock  nut  and  turn  the  adjuster  nut  to

adjust free play.

Hold  the  adjuster  nut  securely  while  tightening  the

lock nut.

If proper free play cannot be obtained, or the clutch

slips  during  test  ride,  disassemble  and  inspect  the

clutch.

SIDE STAND

Erect the main stand.

Pull  the  lower  end  of  the  side  stand,  and  see  if  it

moves freely.

If  the  side  stand  does  not  move  smoothly,  apply

grease to the pivot area.

If  the  side  stand  moves  too  freely,  check  the  side

stand spring.

Check the axial movement of the side stand.

Check the side stand switch:

- Sit astride the motorcycle and raise the side stand.

- Start the engine with the transmission in neutral.

- Lower the side stand.

The engine should not accelerate as the throttle

grip is operated.

If  there  is  a  problem  with  the  system,  check  the

side stand switch.

LOCK NUT

LOCK NUT

LOCK NUT

LOCK NUT

LOCK NUT

LOCK NUT

LOCK NUT

LOCK NUT

LOCK NUT

LOCK NUT

LOCK NUT

LOCK NUT

LOCK NUT

LOCK NUT

LOCK NUT

LOCK NUT

LOCK NUT

LOCK NUT

ADJUSTER

ADJUSTER

ADJUSTER

ADJUSTER

ADJUSTER

ADJUSTER

ADJUSTER

ADJUSTER

ADJUSTER

ADJUSTER

ADJUSTER

ADJUSTER

ADJUSTER

ADJUSTER

ADJUSTER

ADJUSTER

ADJUSTER

ADJUSTER

SIDE STAND SWITCH