DAELIM Roadwin R Service Manual - Symbols / Abbreviations

SYMBOL

1-14

GENERAL INFORMATION

SYMBOLS / ABBREVIATIONS

The following symbols are used in this manual to represent job-related warnings or cautions.

MEANING

Indicates  dangerous  area.  Serious

accident may result if instructions are not

followed.

MEANING

Indicates important  work. Minor injury or

vehicle part damage may result if instruction

are not followed.

Indicates general safety matters. Provides

safety and appropriate handling procedures.

SYMBOL

SYMBOL

The following symbols indicate needed lubrication steps, the changing of parts, and required specialized tools, etc. when

performing maintenance.

CAUTION

Use option tool. These tools are obtained as you order parts.

Indicates reference page. (Example : Refer to page 3-1)

Use recommended engine oil, unless otherwise specified.

Use molybdenum oil solution (mixture of the engine oil and molybdenum grease with the ratio 1:1)

Use multi-purpose grease (Lithium based multi-purpose grease NLG #2 or equivalent)

Use molybdenum disulfide grease (containing more than 3% molybdenum disulfide, NLGI #2

or equivalent)

Use molybdenum disulfide paste containing more than 40% molybdenum disulfide, NLGI #2 or

equivalent)

Use silicone grease

Apply a locking agent. Use the agent of the middle strength, unless otherwise specified 

Apply sealant

Replace the parts with new ones before assembly

Use brake fluid, DOT3 or DOT4. Use the recommended brake fluid, unless otherwise specified

Use Fork or Suspension Fluid

Use special tool

Special grease, etc. that do not correspond to the above are indicated without using symbols.

(

3-1)