DAELIM Roadwin R Service Manual - 16. Hydraulic Brake
16-1
16. HYDRAULIC BRAKE
SERVICE INFORMATION
GENERAL SAFETY
Don't put in dust or water when filling the reservoir.
Don't mix different types of fluid to prevent from changing chemically.
Don't use the removed brake fluid.
Avoid spilling brake fluid or painted plastic and rubber parts because of damaging them.
Cover the joint part of the hose to prevent the leak the brake fluid from leaked.
Clean the removed parts with brake fluid and check the airing of each part with a compressed air.
Arrange the removed parts not to be soiled with dust or dirt.
After checking if dust or dirt soils each part, install them.
Always replace the specified parts.
Brake pad can be removed without disconnecting the hose.
Bleed the air in case of removing the brake hose.
SERVICE INFORMATION
16-1
TROUBLESHOOTING
16-2
BRAKE FLUID REPLACEMENT/
AIR BLEEDING
16-3
BRAKE PAD/DISK
16-6
FRONT MASTER CYLINEDR
16-9
REAR MASTER CYLINDER
16-13
FRONT BRAKE CALIPER
16-18
REAR BRAKE CALIPER
16-20
BRAKE PEDAL
16-23
ITEM
FRONT
REAR
STANDARD VALUE
SERVICE LIMIT
SPECIFIED BRAKE FLUID
DOT3 or DOT4
-
BRAKE DISK THICKNESS
4.0
3.0
BRAKE DISK RUNOUT
0.1
0.3
MASTER CYLINDER I. D.
12.700~12.743
12.755
MASTER PISTON O. D.
12.657~12.684
12.645
CALIPER CYLINDER I. D.
24.440~25.410
25.42
CALIPER PISTON O. D.
25.278~25.328
25.27
SPECIFIED BRAKE FLUID
DOT3 or DOT4
-
BRAKE DISK THICKNESS
4.0
3.0
BRAKE DISK RUNOUT
0.1
0.3
MASTER CYLINDER I. D.
12.700~12.743
12.755
MASTER PISTON O. D.
12.657~12.684
12.645
CALIPER CYLINDER I. D.
25.000~25.033
25.070
CALIPER PISTON O. D.
24.914~24.935
24.870
SPECIFICATIONS
Unti : mm