DAELIM Roadwin R Service Manual - Starter Motor
of
295
STARTER MOTOR
REMOVAL
With the ignition switch turned to "OFF", remove the
negative cable at the battery before servicing the starter
motor.
Remove the rubber cap.
Remove the nut and starter motor cable from the starter
motor.
Remove the holder mounting bolts and clutch wire
holder.
Remove the starter motor mounting bolts and ground
cable.
Pull the starter motor out of the crankcase.
19-3
ELECTRIC STARTER
DISASSEMBLY
Remove the following.
- O-ring
- Starter motor case bolts / spring washers
- Front cover
- Seal ring
- Lock washer
- Washer
- Shim
Always turn the ignition switch OFF before
servicing the starter motor. The motor could
suddenly start, causing serious injury.
BOLTS
BOLTS
BOLTS
BOLTS
BOLTS
BOLTS
BOLTS
BOLTS
BOLTS
BOLTS
BOLTS
BOLTS
BOLTS
BOLTS
BOLTS
BOLTS