DAELIM Roadwin R Service Manual - Adjustment of Throttle Cable

EMS(Engine Management System)

5-39

Assemble the insulator into the throttle body.

Torque: 1.0 kgf m

INSTALLATION OF INSULATOR AND THROTTLE BODY

Installation of insulator and throttle body is the

reverse order of removal 

Check the o-ring when the insulator become

assembly.

Assemble the insulator gasket.

ADJUSTMENT OF THROTTLE CABLE

INSPECTION OF SENSOR AND

ACTUATOR 

Assemble the throttle cable

Adjust the free play of the throttle grip (2-4)

Connect each sensor and the actuator’s coupler.

Check the ISA (Idle speed actuator) (5-24)

Check the TPS (Throttle position sensor (5-18)

Replace the gasket with new one.

Assemble the insulator and throttle body to cylinder

head

Torque : 1.2 kgf m

Check the value of TPS (Throttle position sensor) 

whether the standard value or not, after assembly.

Check the MAPAT sensor (5-14)

!

CAUTION

!

CAUTION