DAELIM Roadwin R Service Manual - Oil Filter Element Change
INNER ROTOR
INNER ROTOR
INNER ROTOR
INNER ROTOR
INNER ROTOR
INNER ROTOR
INNER ROTOR
INNER ROTOR
INNER ROTOR
INNER ROTOR
INNER ROTOR
INNER ROTOR
INNER ROTOR
INNER ROTOR
INNER ROTOR
INNER ROTOR
INNER ROTOR
INNER ROTOR
3-4
LUBRICATION
Always use a genuine oil filter element.
Be sure to replace the oil filter seal when removing
oil filter element.
Be careful not to lose the oil filter spring when
assembling the oil filter element.
OIL FILTER ELEMENT CHANGE
Drain the engine oil. (
3-3)
Loosen the 3 flange bolts securing the oil filter cover
bolt, filter cover, the oil filter element and oil filter
spring.
Change the oil filter element with a new one.
Check if the oil filter seal is in good condition, if
necessary, replace it with new one.
Install the filter element, spring and oil filter cover and
tighten the bolts to the specified torque.
TORQUE : 1.1 kgf
m (11 N
m)
OIL PUMP
REMOVAL
Drain the engine oil. (
3-3)
Remove the oil filter. (
3-4)
DISASSEMBLY
Clean the oil pump body, inner and outer rotors with
fresh cleaning oil.
OIL FILTER COVER
OIL FILTER COVER
OIL FILTER COVER
OIL FILTER COVER
OIL FILTER COVER
OIL FILTER COVER
OIL FILTER COVER
OIL FILTER COVER
OIL FILTER COVER
OIL FILTER COVER
OIL FILTER COVER
OIL FILTER COVER
OIL FILTER COVER
OIL FILTER COVER
OIL FILTER COVER
OIL FILTER COVER
OIL FILTER COVER
OIL FILTER COVER
OIL FILTER ELEMENT
OIL FILTER ELEMENT
OIL FILTER ELEMENT
OIL FILTER ELEMENT
OIL FILTER ELEMENT
OIL FILTER ELEMENT
OIL FILTER ELEMENT
OIL FILTER ELEMENT
OIL FILTER ELEMENT
OIL FILTER ELEMENT
OIL FILTER ELEMENT
OIL FILTER ELEMENT
OIL FILTER ELEMENT
OIL FILTER ELEMENT
OIL FILTER ELEMENT
OIL FILTER ELEMENT
OIL FILTER ELEMENT
OIL FILTER ELEMENT
OUTER ROTOR
OUTER ROTOR
OUTER ROTOR
OUTER ROTOR
OUTER ROTOR
OUTER ROTOR
OUTER ROTOR
OUTER ROTOR
OUTER ROTOR
OUTER ROTOR
OUTER ROTOR
OUTER ROTOR
OUTER ROTOR
OUTER ROTOR
OUTER ROTOR
OUTER ROTOR
OUTER ROTOR
OUTER ROTOR