DAELIM Roadwin R Service Manual - Fuel Gauge

21-5

TROUBLESHOOTING

INSPECTION

CAUSE OF TROUBLE

INSPECTION

CAUSE OF TROUBLE

Cushion spring weak.

Overloaded.

Damper oil leaks.

Fork pipe or cushion rod bent.

Sliders stuck.

Cushion stopper rubber damaged.

1. Suspension excessively soft.

2. Suspension excessively hard.

3. Noise from the suspension.

POOR FRONT/REAR SUSPENSION PERFORMANCE

FUEL GAUGE

Fuse cut.

Battery weak or totally discharged.

Faulty ignition swtich.

Faulty terminal connection.

Wire harness damaged.

Faulty float.

Balance coil damaged or shorted.

Terminal loose.

Faulty terminal connection.

Balance  coil/lead  shorted  or

damaged.

GAUGE READING INACCURATE (IGNITION SWTICH ON)

1. Operate the turn signal to check the

battery circuit.

2. Remove the fuel level sensor, and

move float to check the status of

operation.

Float up : Full position

Float down : Empty position

3. Short-circuit the tank unit terminal

on the wire harness side.

4. Terminal joints loose or faulty

connection.

Signal continuously

operates dim or does not

operate at all.

Needle moves.

Needle not moving.

Unsatisfactory

Signal operates satisfactorily.

Check

Needle not moving.

Needle not moving.