ECopy ShareScan 4.2 Installation And Setup Manual - Copy

94  

|

  Reference: Connector-specific configuration information

Copy

Copy enables users to perform a variety of copying functions using eCopy ShareScan Embedded 

software. When you activate the connector on a device running the embedded Client, the user 

does not need to quit the Client to make copies.

You can create Copy connector profiles on any PC running the Services Manager, and you can 

publish them to any Services Manager that supports the ShareScan Embedded software.

Copy is available for some, but not for all, embedded devices. If you try to activate a Copy profile 

on an unsupported device, the system will display an error message.

To configure a Copy profile:

1

In the console tree, select 

Copy

 > 

Properties

.

2

Select the 

Display

 tab and then specify the 

Image

 and 

Label

 settings (see page 69).

3

Click 

Save

, select or specify the profile name, and then click 

Save

.

4

In the console tree, select 

Copy

 > 

Services

.

Tracing is the only service available for Copy.

5

Select the 

Tracing

 tab and then specify the settings (see page 91).

6

Click 

Save

, select the profile name, and then click 

Save

.

Note:

You cannot use a Copy profile on a ScanStation.