ECopy ShareScan 4.2 Installation And Setup Manual - page 40
30
|
Quick Start: Installing and setting up ShareScan
To configure the Document Settings service.
1
Select the
Document Settings
tab.
2
For each option, specify the default settings that you want available to the user at the
device.
If you want to allow the user to change the default setting for an option, select the
User
modify
check box.
3
Click
Save
to save changes to the profile.
To configure the Scanner Settings service.
1
Select the
Scanner Settings
tab.
2
Select the
Enable Scanner Settings
check box.
3
For each option, specify the default settings that you want this connector profile to use.
(You can create additional profiles for the same connector that use different scanner
settings at the same device.)
4
Click
Save
to save changes to the profile.