ECopy ShareScan 4.2 Installation And Setup Manual - page 204

194  

|

  Reference: Managing the ScanStation Client

Starting and stopping the Client

You can start the Client at the device or from the Administration console. If the Windows Task 

Manager is open when you start the Client, the Client will automatically close it.

To start the Client at the device:

1

Select 

Start

 > 

Programs

 > 

eCopy Applications

.

2

Select 

ScanStation Client

.

To quit the Client at the device:

By default, there are two ways to quit the Client at the device:

■

If the Client is configured to use a hard keyboard, press E

SC

 or A

LT

+F4 and then press the 

Yes button in the Exit window.

■

If the Client is configured to use the on-screen (soft) keyboard, press A

BOUT

 and then 

press the Exit icon.

You can configure the Client so that users must enter a password in order to quit the Client.

To configure and start the Client from the Administration console:

1

In the console tree, select 

Devices

 >

device_name

> > 

Manage

.

The 

Manage ScanStation Client

 pane displays Client information and enables you to 

configure settings for the Client.

2

Select the 

Status

 tab.

The information in the 

Driver Name

 field is based on the product key.

3

To keep unauthorized users from quitting the Client, select the 

Settings

 tab, enter a 

password in the 

Password (Exit)

 field, and then click 

Save

.

Note:

On a ShareScan system running on Windows Vista, you cannot start the Client from the 

Administration console.