ECopy ShareScan 4.2 Installation And Setup Manual - page 253
eCopy ShareScan
®
Installation and Setup Guide
|
243
Firewall and switch worksheet
Certain TCP ports must be open for communication between the devices on the network. You
can open the required ports (on switches, routers, or firewalls) between specific devices; you do
not need to open a required port to
all
devices on the network.
Copy and complete the worksheet for each router, switch, firewall, or multi-homed PC that could
affect communication.
TABLE 64. Firewall and switch worksheet
Item
Description
Firewall or
other device
Example
Manufacturer
Cisco
Model
Location
2-C22
9030, 9100
Must be open for communication between the Services
Manager and eCopy-enabled devices.
Open
8899, 9988 on
multicast IP
address
239.254.5.6
a
a.
239.254.5.6 is an administratively scoped Class D IP address. It is used so that the packets are contained within the
network. The multicast source relies on multicast-enabled routers to forward the packets.
Optional, for encrypted UDP communication between the
Services Manager and eCopy-enabled devices.
Open
8888, 9999 on
multicast IP
address
239.254.5.6
Required, if you are using the eCopy Inbox Agent with
Scan to eCopy Desktop.
Optional, for unencrypted UDP communication between
eCopy Inbox Agent, Services Manager, and eCopy Desktop
clients.
Open
9200 - 9250
Used internally on PCs where the Services Manager is
running. No special configuration is required.
Default
9010, 9101
Used for communication between the Administration
console and the eCopy Agent service.
7125
Used internally on PCs where the Services Manager is
running.