ECopy ShareScan 4.2 Installation And Setup Manual - To Create A Copy of A Group:

190  

|

  Reference: Managing eCopy-enabled devices

To create a copy of a group:

Sometimes it is easier to copy and edit an existing group of connector profiles than to create a 

new group from scratch.

1

In the console tree, right-click 

Devices

 and then click 

Publish connector profiles

.

The 

Publish Connector Profiles

 window opens.

2

Select the group of profiles that you want to copy.

3

Click 

Edit

.

The 

Modify Device Profile

 window opens.

4

Enter a name for the new group, select 

Save As

, and then click 

OK

.

A copy of the group of profiles is saved under the new name.

To use a backup copy of connector profiles on a target device:

1

Start the Administration console on the target device.

2

Import the backup copy from the BackupConnectorProfiles folder on the target device 

(see page 56).

To use published profiles on a different device:

1

Start the Administration console on the target device on which you want to use the 

published profiles.

2

Import the profiles and publishing information from the eCopyPublishingInfo folder, 

which is under the Base location folder on the source device (see page 56).

Note:

You can edit the copied group of profiles before saving it to the Base location.