ECopy ShareScan 4.2 Installation And Setup Manual - page 135
eCopy ShareScan
®
Installation and Setup Guide
|
125
Fax Format settings are available for the eCopy connector for Fax via SMTP only.
TABLE 34. LDAP/SMTP Properties: User Logon tab
Section
Field
Description
Logon
Send from a generic account
Sends the user at the device directly to the Send screen
without displaying the Logon screen. If you select this option
you must specify a generic e-mail address or select the User
modify option, or select both.
If you do not want to use the LDAP Address Book, you must
select this option.
Generic e-mail
A generic e-mail address that is used as the sender account
for all e-mail.
User modify
The user at the device can modify the sender’s e-mail address.
LDAP
Requires the user at the device to enter the user name and
password specified for the LDAP server.
Windows domain
Enables users at the device to use their Windows logon
information, via the SAMAccountName attribute, to log on.
The Domain field specifies the Windows domain name. This is
required if you select the Windows option.
Available only if you select Active Directory as the server type.
Novell
The Novell tree. This is required if you select the Novell
option.
Available only if you select eDirectory as the server type.
TABLE 35.
LDAP/SMTP Properties: Fax Format Settings
Section
Field Name
Description
Fax Address Format
Cover Page /
No Cover page
Displays the fax format that you define in the Fax Address Format
window.
Format
Opens the Fax Address Format window where you define the fax
address format required by your fax server application or Internet fax
service.
Refer to the documentation for your fax application to obtain the
correct format for the fax address.
Since fax application vendors change these formatting schemes
frequently, make certain you obtain the current format.