ECopy ShareScan 4.2 Installation And Setup Manual - page 221
eCopy ShareScan
®
Installation and Setup Guide
|
211
TABLE 58. Client: Post-scanning options
Option
Description
Log Out
Displays the Logon screen. Appears only when Session Logon is enabled.
New Job
Displays the main Client screen. Appears only when Session Logon is enabled.
Done
Displays the main Client screen. Appears only Session Logon is not enabled.
New Document
Displays the scan preview screen so that you can scan a new document using the current
settings. Place the new document in the feeder or on the glass and then press Scan More
(if you are using the Client’s interface).Press Insert (if you are using the TWAIN driver’s
own interface).
New Destination
Enables you to send the scanned document to another connector. Select the target
connector in the list and then press New Destination. The Client opens the target
connector and displays the scanned document on the scan preview screen. Press Next
and then follow the prompts provided by the target connector.