ECopy ShareScan 4.2 Installation And Setup Manual - Specifying A Default Device

170  

|

  Reference: Managing eCopy-enabled devices

Specifying a default device

You can specify a default device from which new devices inherit their initial configuration of 

connector profiles. For example, if the default device is configured to use the Exchange and Scan 

to Printer connectors, new devices are automatically configured to use the same connectors.

If you do not specify a default device, new devices will not be configured to use any connectors.

To specify the default device:

1

In the console tree, right-click the device name.

2

Select 

Set as default device

.

Note:

Devices can only inherit connector profiles from a default device from the same manufacturer.