ECopy ShareScan 4.2 Installation And Setup Manual - To Start The Client:
Manual is about: digital copiers and scanners
of
266
eCopy ShareScan
®
Installation and Setup Guide
|
37
To start the Client:
1
Select the
Status
tab.
2
Under
C
lient Status
, click
Start
.
The Client appears on the device’s touch screen.
A button appears for each connector that you have configured for the device.
Note:
If you are using ShareScan on a Windows Vista operating system, you must start the Client by
selecting Start > Programs > eCopy Applications > ScanStation Client.
Note:
Depending on the device that is connected to the ScanStation, you may be prompted to select
the device the first time that you start the Client or the first time that you select a connector.