ECopy ShareScan 4.2 Installation And Setup Manual - Installing Ecopy Sharescan

12  

|

  Quick Start: Installing and setting up ShareScan

Installing eCopy ShareScan

Use the ShareScan installation program to install the following components on a network 

computer:

■

Client

■

Services Manager

■

Administration console

■

One or more eCopy Connectors supplied with the installation program.

Installing connectors is not the same as activating them. You can install all the connectors suitable 

to your environment now and activate them when you need to use them. For example, if you are 

in a Windows environment, you do not need to install the Lotus Notes Mail and Fax connectors. 

(If you want to install a connector later, you must go through the installation process again.)

To install the software:

1

Insert the eCopy ShareScan CD (Disk 1) in the drive.

The 

Launch

 window opens,

2

Click 

Install ShareScan

.

3

Select the language for the installation and then click 

OK

.

The 

Welcome

 window opens.

4

Click 

Next

.

If your computer does not meet the minimum requirements, the installation program 

displays a system requirements message. Read the message and then click 

Install

 to 

proceed.

The 

Welcome

 window opens again.

5

Click 

Next

.

The 

Components

 window opens.

6

Click 

Next

.

The 

Connectors

 window opens.

7

Select the connectors you want to install.

Note:

You can use the Copy Connector on some, but not all, devices running eCopy ShareScan 

Embedded software. If you try to activate a Copy connector profile on an unsupported device, 

the system will display an error message. You can use the Fax via Print Connector only on a 

ScanStation.